The AQR-FT series high-temperature resistant split type control electric device is suitable for complex on-site environments, such as high temperature, excessive vibration, and inconvenient debugging conditions during installation. To avoid damage to electronic components caused by excessively high temperatures or hazardous electronic components due to high dust concentration in the on-site air, the AQR-FT series high-temperature resistant split type control intelligent electric device is our more ideal choice. This type of intelligent electric device refers to the separation and assembly of the control components and mechanical components of the intelligent electric device. Only the actuator body components and signal acquisition parts are installed on the valve, while the intelligent control part is set in the split box, which can be installed in a relatively safe and convenient area during use (without distortion within a 10 meter split distance)
Require a large LCD Chinese display screen (simple display screens with display symbols cannot be used), which should not only be able to display and
Faults and alarms in valves, control circuits, and actuators themselves, as well as combined sensors for the core components of electric actuators, require the use of insulation
Value encoder. It can continuously record valve position and other data without self-contained power supply or in the event of power loss.
The shell material of the electric actuator needs to be made of gold cast aluminum, and any materials containing iron such as cast iron or carbon cannot be used for the shell
Steel, alloy steel, plastic materials. Require completely non-invasive and cover free debugging. Any external adjustment, debugging, fault diagnosis, and setting value modification of the actuator can be carried out through external operations without the need to remove the end cover of the electric actuator. Accept Bluetooth read and write within a range of 10M. Capable of on-site/remote/PLC/control modes. The intelligent integrated electric actuator has an automatic inspection function after each power on to ensure the normal operation of the equipment, and also has data and event recording and storage functions,
Switch type valves can accept passive signals of switch values; Adjustable class can accept 4-20mA analog signals; For future bus upgrades
Level intelligent digital unified management, providing electric actuators with replaceable bus interfaces; Provide specific on-site requirements for
Should be executed.
The junction box of the electric actuator is required to be plug-in type, which is convenient for external power drive of the actuator in case of emergency power outage.
This project adopts a country of origin split type intelligent integrated electric actuator. Split distance of about 10 meters, split description:
A control unit with a motherboard needs to be separated from the motor. We cannot simply separate the display screen from the operation.
|
